Quality Fiber3D printing material ensuring trouble -free printing.
Pla matt filament for use to 3D printers It is very strong and does not exclude chemical odor when printing. PLA is biodegradable - made of renewable natural resources. PLAs helps to print large components more easily.
Material description : PLA, Polylactic Acid, Polymonic acid is a bioplastic made of corn starch with the same properties as plastic made of oil. This plastic is much more gentle on nature than ABS. Tetrahydrofuran soluble, possible long -term exposure to acetone can cause the surface to etr. Pla matt is not harmful to health and is degradable in nature -controlled composting. Compared to ABS, the material strength is higher, the material is better printable, the only disadvantage is the lower temperature resistance. Pla matt can be actively cooled during printing, it does not need a heated pad. The PLA processing temperature is 190 - 220 ° C.
PLA FILAMENT Surface treatment : The material cannot be easily sanded, grinding (friction) produces heat that causes "pulling" fibers from prints. Therefore, it is advisable to cool the printout for example by grinding it under water. For the same reason, holes are difficult to drill into the print (again the problem with warming up). It is advisable to spray the material first (used in modeling) and then grind, spray again and over and over until the model is perfect for us and then spray it with paint. The resulting model can also be inserted into the "tissue" along with shells, stones, remnants of filaments or pieces of prints.
Storage: We recommend securing a dry environment. In poor storage in a humid environment, it absorbs moisture, which manifests itself as bubbles on the surface. Protect from heat.
Main advantages of PLA:
- Simple printing for printing
- Small shrinking when cooling - no heated pad or chamber
- good print quality even when printing at high speed
- soluble in sodium hydroxide
- biodegradable material
Weight incl. Packaging: 1,36 kg; Outer coil diameter: 200 mm; Center hole diameter: 75 mm; Coil width: 64 mm.
Weight of empty coil approx: thinner 130 g, coarser 144 g, transparent 132 g
Mass flow : 7 - 9 g/10 min (190 ° C)
Material is supplied in cardboard box , or without Box , vacuum wrapped together with silica gel that absorbs moisture.
Supplied in 8 shades.
Additional information
| Category: | PLA |
| Barva: | zelená, modrá, červená, bílá, šedá, růžová, matná |
| Váha materiálu: | 1 kg |
| Průměr: | 1,75 mm |
17,55 €
