Thanks to the expansion properties of the material, users can reduce the material flow by up to 60 % and thus reduce weight by up to 65 % from conventional PLA. Nevertheless, 3D printing is very accurate with an amazingly matt surface that is easy to work.
can also very effectively shorten the printing time using large layer heights or extra thick individual perimeters.
for precise printing and to achieve the desired properties it is necessary for LW PLA Fine tuning and optimization.
Principle of active singing technology:
It depends on speed, temperature and flow. To control the LW PLA expansion, focus on these print parameters, this allows you to change the density of the material of different parts on a particular model.
Colorfabb LW PLA recommends four phases of printing printing to achieve maximum expansion at a given speed, temperature and flow.
- Print the cube at your chosen printing speed at temperatures between 200 ° C to 280 ° C
- Measure the thickness of the perimeter of each cube and record the temperature with the greatest expansion.
- Print additional cubes with decreasing flow levels at temperature specified in step 2.
- Select the print where the peripheral thickness corresponds to the nozzle size.
Print more models!
Reduction of flow also means less filament consumption. Therefore, with LW-PLA material can be printed two to three times as many parts as with normal plants
Additional information
| Category: | PLA |
| Barva: | natural |
| Váha materiálu: | 0,75 kg |
| Průměr: | 1,75 mm |
| Přesnost struny: | ± 0,03 mm |
| Teplota podložky: | 0-60°C |
| Teplota trysky: | 195-250°C |