【Pla-Lw】 Pla-LW is an improved version of PLA developed by ESUN for models of aircraft, drones,
【Stable dimensional tolerance】 minimum tolerance and Small shrinkage - ensure consistent administration and stable prints, no clogging, extremely high print success, resulting in printed components that have excellent finish and are very accurate. (depending on the printer)
【Without knocking and clogging 】 1kg coil. Material with excellent circularity and very low tolerance of the diameter, does not overlap or get tangled. It melts, does not crack, does not contain bubbles. Print smoothly and repeatedly without blocking a nozzle or extruder. At a temperature of about 210-270 ° C, this material begins to foam during printing, which increases its volume nearly 1.2 times and the printing rate can be reduced to 45 % for lightweight printing.
Material weight: 1 kg. ESUN FILAMENT SELLED IN A RESEALABLE PACKAGING, which keeps it dry and out of dust and foreign particles, prevents nozzles and provides smooth 3D models.
- string diameter: 1.75 ± 0.03 mm
- coil size: diameter 200 mm - width 64 mm - center hole 57 mm
- pack size: 216 x 202 x 76 mm
- weight Package: 1,48 kg
- nozzle temperature: 190-270 ℃
- pad temperature: 45-60 ℃
- density: 1.2 g / cm3
- melt Flow Index: 8.1 (190 ° C / 2,16 kg) g / 10min
- tensile strength: 32.2 MPa
- extension at a quarry point: 68.9%
- bend strength: 41.31 MPa
- fault strength module: 1701 MPa
- notch toughness: 8.58 kj / ㎡
- manufacturer: Esun
Additional information
| Category: | PLA |
| Barva: | natural |
| Váha materiálu: | 1 kg |
| Průměr: | 1,75 mm |
| Přesnost struny: | ± 0,03 mm |
| Teplota podložky: | 45 - 60°C |
| Teplota trysky: | 190 - 250 °C |
33,37 €