PP Filament 1.75 mm Transparent 0.5kg Verbatim

• highly durable polypropylene (PP) for 3D printing technologies (FFF) FUSED FILAMENT FABRICATION.
• one of the most used plastics in the industry.
• good mechanical properties, stiffness and tensile strength.
• good adhesion for subsequent surface treatment.
• resistant to acids, principles/lye and organic solvents.
• very lightweight.
• Made of granulate suitable for food contact.
• good translucency.
• usability on the components stressed by pulling.

*Recommended print pad is PP foil

> Technical Specifications :
-DeColation: Underline; "> Process temperature : 220 ° C
Clean Weight : 0.5 kg
/> Melt Flow Rate @ 230 ° C, 21.1n : 20.0 g/(10 minutes)
Underline; "> density : 0.89 g/cm 3
° C
Hardness D on Hardometer (JIS K 6253) < /Span>: Shore D55
e; "> Flexural Strength : 14 MPa
Flexural Module : 350 MPa
Impact Strength >: 14 MPa
Extension (JIS K 7113) : 200 %