The engine can be supplied with a cable with a DuPont connector (RAMPS) or with the JST XH connector (MKS boards, etc.)
Supplied without a cable. Cable JST XH Order Here and DUPONT cable here .
Flange: Nema 17
Engine height: 40 mm
Step: 1.8 °
Current: 1.68a
Weight: 0.28 kg
Warning:
The product may require professional assembly, not a separate functional total.
10,51 €
Cable for motors 0.28 Nm, 0.44 Nm, 0.56 Nm. 1 meter cable to the stepper motor. The cable is equipped with terminals. On one side the end for the motor, on the other side DUPONT (mainly RAMPS plates).
In stock >10pcs (79 pcs)
1,37 €
The 0.28nm stepper engine serves as an alternative replacement for SX17-1003VLQCEF engines. The engine is suitable for use on XYZ axes for extruder we recommend a stronger version.
Sold out
12,27 €
The 0.56nm stepper engine serves as an alternative replacement for SX17-1005VLQCEF engines. The engine is suitable for use on all axes.
In stock <10pcs (1 pcs)
10,51 €
0.56 Nm stepping motor with integrated T8x8 trapezoidal screw - length 420 mm - including matching nut - it is recommended to replace the nut with a nut with a spring to limit the clearance. Thanks to the integrated screw, you don't have to use flexible couplings or connections with different tubes.
Sold out
22,82 €
The 0.52nm stepper engine serves as an alternative replacement for SX17-1005VLQCEF engines. The engine is suitable for use on all axes.
Sold out
12,27 €
Cable for engines 0.28 Nm, 0.44 Nm, 0.56 Nm. 2 meters long cable to stepper engine. The cable is equipped with endings. On the one hand the ending for the engine (terminal ph2.0) on the other side of the JST-XH 2.54 (SKR, MKS, etc. control boards).
In stock <10pcs
from 1,37 €
3,48 €
40%
5 PIN Step Motor 28Byj -48 - 4 phases. Miniature step motor 28byj-48 with ULN2003 control circuit is suitable for many projects. Miniature dimensions, 12V power supply, LED indication.
Sold out
2,07 €
3,48 € Discount 40.4%
Cork shock absorber for step engines with NEMA17 flange measures 42 x 42 x 3 mm. It is used to reduce the transmission of vibration to the printer frame, reduce heat transfer from hot engines to the plastic part of the frame, reduced resonance from the engine, fewer sounds from the printer.
Sold out
1,02 €
The 0.22 Nm stepper motor serves as an alternative replacement for SX17-1003VLQCEF engines. The engine is suitable for use on XYZ axes for extruder we recommend a stronger version.
In stock <10pcs (2 pcs)
7,70 €
Step motor with a thickness of 0.42nm. The engine is suitable for use on all axes.
In stock <10pcs (5 pcs)
12,27 €
