Description
Step engine cable with DUPONT connector here.
Cables can be differently colored!
More from category
Cable of step engine JST XH
1,37 €
You also might need
-
Stepper motor cable DUPONT
Cable for motors 0.28 Nm, 0.44 Nm, 0.56 Nm. 1 meter cable to the stepper motor. The cable is equipped with terminals. On one side the end for the motor, on the other side DUPONT (mainly RAMPS plates).
In stock >10pcs (79 pcs)
1,37 €
-
Step motor 0.28 nm
The 0.28nm stepper engine serves as an alternative replacement for SX17-1003VLQCEF engines. The engine is suitable for use on XYZ axes for extruder we recommend a stronger version.
Sold out
12,27 €
-
Step motor 0.44 nm
Step motor with a thickness of 0.44 nm. The engine is suitable for use on XYZ axes for extruder we recommend a stronger version, but this engine can also be used.
In stock >10pcs (13 pcs)
10,51 €
-
Step motor 0.56 nm
The 0.56nm stepper engine serves as an alternative replacement for SX17-1005VLQCEF engines. The engine is suitable for use on all axes.
In stock <10pcs (1 pcs)
10,51 €
-
Stepper motor 0.56Nm with integrated T8x8 trapezoid and nut
0.56 Nm stepping motor with integrated T8x8 trapezoidal screw - length 420 mm - including matching nut - it is recommended to replace the nut with a nut with a spring to limit the clearance. Thanks to the integrated screw, you don't have to use flexible couplings or connections with different tubes.
Sold out
22,82 €
-
Step motor 0.42 Nm with trapezoid T8x8 and matrix
Step engine NEMA 17 with integrated trapezoidal screw T8x8 and nut. Available length of trapezoidal screw 300 mm, 400 mm, 500 mm. Matrix recommended replacing a nut with a spring to define clearance or plastic nut. Thanks to the integrated screw you do not have to use flexible clutches or joints with different hoses.
Sold out
from 19,31 €
-
Step motor 0.42 nm with integrated trapezoid T8x2 and matrix
Step motor with a thickness of 0.42 Nm with integrated trapezoidal screw T8x2 - including the corresponding matrix - nuts recommended replacing a nut with a spring to define the clearance. Thanks to the integrated screw you do not have to use flexible clutches or joints with different hoses.
Sold out
22,82 €
-
3,48 €
40%
Step motor 28byj-48
5 PIN Step Motor 28Byj -48 - 4 phases. Miniature step motor 28byj-48 with ULN2003 control circuit is suitable for many projects. Miniature dimensions, 12V power supply, LED indication.
Sold out
2,07 €
3,48 € Discount 40.4%
-
Artillery stepper engine
Stepper motor available for 5 3D printer models.
On demand
17,20 €
-
Creality Step Motor
A replacement step engine that is in all Creality FDM printers.
On demand
from 19,31 €