3DLAC - Spray for better adhesion of prints to pad

Special varnish for 3D printers with larger grip without perfume

Our company personally tested the following materials: PLA, PET, ABS, ASA, FLEXFILL, WOOD and BRONZE FILL, NGEN, XT and XT-CF20.

Discover a special varnish for 3D printers, without perfusion with greater adhesion to each surface, 3DLAC .

With its help, you will have no problem printing any material. With a properly applied layer of spray, there is no problem to remove the print or remove from the item (the condition is to cool the pad to room temperature).

3DLAC solves the problem of adhesion of most materials to the mat. In light spraying on the pad, the print is fastened on the mat. When printing is over, the printout is smoothly leaving without destruction.

3DLAC has been developed with the consulting of a chemical laboratory with more than 50 years of experience. Its composition does not contain any added aromatic substances (some people even smell pleasantly) and improves the adhesion of the print to the printing pad.

Revolutionary lacquer that improves the amazing world of 3D printing.

Due to the characteristics, it replaces Kapton, adhesives and other often overpriced alternatives, for less costs and lighter use.

Use:

Spray the paint on a pad with a distance of 20 cm. After heating the pad, the print will be attached to the glass. After printing, let the pad cool down and you can remove your printing smoothly.

Composition:

isopropyla, alcohol, merhyal, isobutane, propane, vp/copolymer, alcoholdat. This product does not contain folders as PBT/VPVB.

Warning:

The vessel is under pressure and its content is flammable!