Spare parts
-
LML8UU LM8ULU linear bearing
LM8UU extended bearing. Avoid problems with the misalignment of two short bearings and install one long for better stability. (The product can be ordered after 1 piece, the photo is only illustrative.)
Sold out
2,07 €
-
Stepper motor 0.56Nm with integrated T8x8 trapezoid and nut
0.56 Nm stepping motor with integrated T8x8 trapezoidal screw - length 420 mm - including matching nut - it is recommended to replace the nut with a nut with a spring to limit the clearance. Thanks to the integrated screw, you don't have to use flexible couplings or connections with different tubes.
Sold out
22,82 €
-
Arduino nano
Arduino Nano is a compact plate suitable for smaller projects.
Sold out
5,24 €
-
Arduino Pro Mini
Arduino Pro Mini is used to start the smallest projects.
Sold out
3,83 €
-
Matrix to T profiles 3030
Matrix for profiles 3030 HS-30 etc. The thread in the matrix is M6 M5 M4 m3. The nuts can be inserted into the profile at any time.
In stock >1000pcs
0,21 €
-
Chimera Hotend - Dual Hotend -2 in 2
Dual hotend for two-material or two-color printing. Including fan, 2 pcs 0.4/1.75 mm nozzles, heating elements (40W) and NTC 100K 3950 thermistor. Easy height adjustment via smooth heatbreaks. Hotend voltage 12 or 24 V.
In stock <10pcs
14,03 €
-
Hotend 2in1 two-color hotend
Single nozzle hotend for color mixing. 2 colors in one output. Including heating element (40W), thermistor and fan. Voltage according to choice 12 or 24 V.
Sold out
14,03 €
-
MK10 hotend silicone protection - Flashforge
Silicone protection and insulation in one for cubes marked MK10.
In stock >10pcs (49 pcs)
2,07 €
-
Silicone Protection of Volcano Hotend
Protection against dirt aluminum cube Volcano.
In stock >10pcs (14 pcs)
1,72 €
-
POM travel wheel with bearing
POM wheel with bearing for movement on aluminum profiles. There are several types in the offer; other types are enough to ask for - storage. (The product can be ordered after 1 piece, the photo is only illustrative.)
In stock >10pcs
1,37 €
-
GT2 pulley - black anodex
Pulley for engine deployment or rod with the possibility of securing two screws (worms). Black GT2 pulley with 20 teeth on engine shaft 5 mm (inner pulley hole 5 mm). (The product can be ordered after 1 piece, the photo is only illustrative.)
Sold out
2,07 €
-
GT2 pulley - black anodized
Black smooth pulley corresponding to the dimensions of the 20-tooth GT2 pulley - width 6 mm, hole 3 mm.
In stock <10pcs (4 pcs)
2,43 €
-
Induction proximity sensor LJ18A3-8-Z/BX
Sensor 8 mm detection distance. The sensor indicates the detection of the object by the appearance of the low state at the output and activation of the red LED. The sensor is equipped with a cable with a length of about 1m and a nut for easy assembly. The sensor is equipped with a cable with a length of about 1 m and a nut for easy assembly. The sensor tightness class is IP67. The power range...
Sold out
8,76 €
-
MK10 heating cube
Heating cube for Flashforge, BIQU, WANHAO and others.
In stock >10pcs (52 pcs)
2,07 €
-
RAMPS 1.6+
Reprap Arduino Mega Pololu Shield 1.6 Plus The latest version of the popular RamPs album. Mosfets were replaced by more powerful ones and are under a large cooler. Also, the terminal block has been upgraded and now you do not have to change anything. In addition, double connectors.
Sold out
12,27 €