Filaments
-
Special
Categories of special materials with different additives.
-
POLYSMOOTH FILAMENT Electrically Blue 1.75mm Polymaker 750g
PolySmooth Filament electrically blue 1.75 mm Polymaker 750 g. Polysmooth ™ is a polymaker range designed for models without visible layers. The extermination of the surface is very easy with the Polysmooth material, using commonly available alcohols (IPA or ethanol), while printing the material on any FDM/FFF printer.
1-7 days (10000000 pcs)
42,37 €
-
POLYSMOOTH FILAMENT Snow White 1,75mm Polymaker 750g
POLYSMOOTH FILAMENT Snow white 1.75 mm Polymaker 750g. PolySmooth ™ is a polymaker range designed for models without visible layers. The extermination of the surface is very easy with the Polysmooth material, using commonly available alcohols (IPA or ethanol), while printing the material on any FDM/FFF printer.
1-7 days (10000000 pcs)
33,41 €
-
PVA 1,75mm Natural 350g Smartfil
PVA 1.75 mm Natural 350 g Smartfil. Support Mattress at 3D printing. Non -toxic, odorless.
1-7 days (10000000 pcs)
22,05 €
-
S-FLEX FILAMENT 90A LIME GREEN 1.75mm Spectrum 0.25kg
S-Flex Filament 90A Lime Green 1.75 mm Spectrum 0.25 kg. Filament designed for 3D printing on FDM printer, which allows you to produce flexible objects in a much simpler way than with other materials of this type.
1-7 days (10000000 pcs)
15,86 €
-
S-Flex Filament 90A Lion Orange 1.75mm Spectrum 0.25kg
S-Flex Filament 90A Lion Orange 1.75 mm Spectrum 0.25 kg. Filament designed for 3D printing on FDM printer, which allows you to produce flexible objects in a much simpler way than with other materials of this type.
1-7 days (10000000 pcs)
15,86 €
-
UV Resin Fixed Photocentric clear 1 kg for laser printers LASFMCL01
UV resin solid Photocentric clear 1 kg for laser printers. The fixed center resin is suitable for fixed objects that are supposed to deform slightly under greater force. Prints from this type of material can be bent a little and slightly stretched during compression, but maintain a good strength in the cut with a limited length of the extension. The material has similar mechanical properties to...
Sold out
59,64 €
-
Fiberflex Filament beige 30d 1.75mm Fiberlogs 850g
Fiberflex Filament beige 30d 1.75 mm Fiberlogs 850 g. It is a thermoplastic elastomer that is highly resistant to low temperature impacts.
1-7 days (10000000 pcs)
43,18 €
-
Fiberflex Filament Orange 30D 1,75mm Fiberlogs 850g
Fiberflex Filament Orange 30D 1.75 mm Fiberlogs 850 g. It is a thermoplastic elastomer that is highly resistant to low temperatures.
1-7 days (10000000 pcs)
43,18 €
-
Fiberflex Filament Red 30D 1.75mm Fiberlogs 850g
Fiberflex Filament Red 30D 1.75 mm Fiberlogs 850 g.
1-7 days (10000000 pcs)
43,18 €
-
EASY PLAYENT GRAYS 1,75mm Fiberlogs 2500g
EASY PLALAMENT Gray 1.75 mm Fiberlogs 2 500 g. One of the most widely used 3D printing materials, as the name suggests for its easy use. This filament lasts quite a lot and its properties allow printing of very accurate and complicated elements.
1-7 days (10000000 pcs)
55,39 €
-
Petg Easy Filament Refill Silver 1,75mm Fiberlogs 850g
Petg Easy Filament refill silver 1.75 mm Fiberlogs 850 g. This is a print string without a coil. Easy Pet-G Refill is the same as the classic Easy PETG series.
1-7 days (10000000 pcs)
16,88 €
-
Wood Filament White 1,75mm Fiberlogs 750g
Wood Filament White 1.75 mm Fiberlogs 750 g. Material with a natural look that offers a wide range of uses thanks to the beautiful surface surface, not only for works of art and design elements.
1-7 days (10000000 pcs)
31,30 €
-
Wood Filament Black 1,75mm Fiberlogs 750g
Wood Filament Black 1.75 mm Fiberlogs 750 g. Material with a natural look that offers a wide range of uses thanks to the beautiful surface surface, not only for works of art and design elements.
1-7 days (10000000 pcs)
27,43 €
-
ASA print string black 1,75mm 0,75 kg Filament-PM UV resistant
ASA print string black 1.75 mm 0.75 kg Filament -pm - UV resistant. Material highly UV resistant and suitable for outdoor use.
1-7 days (10000000 pcs)
23,17 €
-
Nylon PA12 Inox 1,75mm 750g Fiberlogs
Nylon PA12 INOX 1.75 mm 750 g Fiberlogs. The nylon is resistant to high temperatures, alcohol and chemicals. Suitable for mechanical and technical applications.
1-7 days (10000000 pcs)
51,66 €